BioSweep® BS900 vs Ozone & Fogging: Understanding the Differences
Updated: Oct 19
When persistent odours, mould or contamination affect a property, selecting the appropriate treatment method depends on the nature of the problem, the materials involved and whether the original contamination source has been addressed.
Ozone generation, chemical fogging and specialist gas-phase oxidation are different approaches, each with particular applications and limitations.
BioSweep UK uses BioSweep® BS900 technology, a five-stage gas-phase oxidation process designed to address residual odour-causing compounds and support specialist decontamination and mould remediation. Treatment is undertaken following appropriate cleaning, source removal and other necessary preparatory works, with outcomes dependent on the condition of the affected environment.
The Limitations of Ozone and Fogging
Ozone generation and chemical fogging are sometimes used to address odours or microbial contamination. However, these methods operate differently and have limitations that should be considered when selecting a treatment.
Ozone Treatment
Ozone is a reactive gas that can interact with certain odour-causing compounds. However, treatment effectiveness depends on factors including ozone concentration, exposure duration, environmental conditions and the substances involved.
Ozone exposure can also present health risks, making appropriate controls, ventilation and re-entry procedures essential.
Chemical Fogging
Chemical fogging disperses a treatment product as fine droplets within an enclosed area. Its effectiveness depends on the chemical formulation, application method, surface accessibility and intended purpose.
Fogging should not be considered a substitute for physical cleaning, removal of contaminated materials or addressing the underlying source of contamination.
Choosing the Appropriate Method
No single treatment method is suitable for every contamination scenario. The nature of the incident, affected materials, access limitations and required treatment objectives should determine the most appropriate approach.
BioSweep UK uses BioSweep® BS900 gas-phase oxidation technology as part of its specialist odour removal and decontamination services, following appropriate cleaning and preparatory works.
How BioSweep® BS900 Technology Works
BioSweep® BS900 is a specialist five-stage gas-phase oxidation process designed to address residual odour-causing compounds and support environmental decontamination.
The technology combines germicidal ultraviolet light with photocatalytic oxidation and other treatment stages to generate reactive compounds within the treatment environment.
Unlike methods that rely on applying liquid chemicals to surfaces, BS900 uses a gas-phase process to treat exposed air and accessible surfaces within the designated treatment area.
Key Benefits of BioSweep® BS900
Five-stage treatment process: Combines complementary technologies to support specialist odour removal and decontamination.
Gas-phase treatment: Reaches exposed air and accessible surfaces without requiring direct application of liquid treatment products.
Residue-free process: Does not leave an applied chemical coating or fragrance intended to mask odours.
Non-masking approach: Designed to break down odour-causing compounds rather than cover them with perfumes.
Professional treatment controls: Undertaken in controlled conditions, with appropriate exclusion and re-entry procedures.
Treatment effectiveness depends on the contamination involved, preparation of the affected environment and accessibility of the materials requiring treatment.
Where contamination remains within absorbent materials, beneath flooring or inside inaccessible voids, additional cleaning, removal or other remedial work may be necessary before treatment.
Odour Neutralisation – Not Temporary Masking
Unlike treatments that rely on fragrances to disguise unpleasant smells, BioSweep® BS900 is designed to break down residual odour-causing compounds through a specialist gas-phase oxidation process.
This can support effective odour removal following incidents involving fire, smoke, water damage, pets, decomposition and other contamination sources.
However, lasting results depend on identifying and addressing the original source, completing appropriate cleaning and removing materials that cannot be adequately remediated.
Where contamination remains within absorbent materials or inaccessible areas, odours may persist or return, particularly when environmental conditions change.
BioSweep UK assesses each project individually and advises on the preparation and treatment required to achieve the agreed objectives.
Our services support residential properties, commercial premises, vehicles and insurance-led restoration projects.
👉 Learn more about our professional Odour Removal & Decontamination Services.
Treatment Effectiveness & Independent Verification
Successful odour removal and decontamination depend on the nature of the contamination, the condition of affected materials and whether the original source has been adequately addressed.
BioSweep UK assesses each project individually to determine the appropriate preparation, treatment scope and verification requirements.
Evidence-Based Treatment Outcomes
Where appropriate, pre- and post-treatment environmental sampling can provide supporting evidence of treatment effectiveness.
Depending on the contamination involved, this may include:
Airborne mould sampling: To assess the types and concentrations of airborne mould spores.
Surface sampling: To investigate microbial contamination on selected surfaces.
ATP testing: To provide an indication of biological residue on sampled surfaces.
VOC sampling: To investigate selected airborne chemical contaminants where relevant.
Samples requiring laboratory analysis are submitted to independent laboratories. UKAS accreditation applies to specific analytical methods where available and should not be assumed to cover every type of environmental testing.
Understanding Treatment Limitations
Laboratory findings are interpreted alongside site conditions, the completed works and the agreed treatment objectives.
No single test can demonstrate the absence of every possible contaminant or guarantee that an odour will never return.
Where the original contamination source has been removed and appropriate preparatory cleaning completed, BioSweep UK can assess whether its treatment guarantee is applicable to the agreed scope of work.
Mould Remediation – Specialist Treatment & Suppression
Mould remediation requires more than treating airborne spores. Successful outcomes depend on identifying and addressing moisture sources, removing materials that cannot be adequately remediated and completing appropriate surface cleaning.
BioSweep UK combines specialist surface cleansing, where required, with BioSweep® BS900 gas-phase oxidation technology to support mould remediation and suppression within the treated environment.
The process is designed to address residual microbial contamination on accessible surfaces and within the treatment environment, following appropriate preparatory works.
Where required, pre- and post-treatment environmental sampling can help assess changes in contamination levels and provide supporting evidence of treatment outcomes.
Because mould spores occur naturally in indoor and outdoor environments, the objective is to remediate abnormal contamination and suppress further growth under appropriately controlled conditions, rather than claim permanent elimination.
Controlling the underlying moisture source remains essential to reducing the likelihood of mould returning.
👉 View our full Mould Remediation & Suppression Service
Controlled Treatment & Safe Re-entry
BioSweep® BS900 is a specialist, residue-free gas-phase oxidation process carried out under controlled conditions by trained BioSweep UK technicians.
During treatment, the designated area must remain unoccupied. People, pets and plants must be removed, and access restrictions maintained until the process has been completed and the required re-entry procedures have been followed.
Unlike treatments that leave an applied chemical coating or fragrance, BioSweep® BS900 does not rely on depositing liquid treatment products onto surfaces.
Before treatment, our technicians assess the environment, including any sensitive materials, equipment or contents requiring particular consideration.
Once the treatment cycle and necessary completion procedures have been carried out, the area can be returned to normal use in accordance with the technician's instructions.
This controlled approach enables BioSweep UK to provide specialist odour removal and decontamination while managing the requirements of each individual property.
Why Insurers, Landlords and Professionals Choose BioSweep
BioSweep UK works alongside insurers, loss adjusters, restoration contractors, landlords and property management companies to provide specialist odour removal, mould remediation and environmental decontamination.
Our services support residential and commercial properties following incidents involving fire, water damage, microbial contamination and persistent odours.
Benefits of Working with BioSweep UK
Specialist Technology: BioSweep® BS900 uses a five-stage gas-phase oxidation process designed to address residual odour-causing compounds and support environmental decontamination.
Insurance & Restoration Experience: We work alongside restoration professionals following fire, flood and other insured incidents, providing specialist treatment after necessary cleaning and preparatory works.
Targeted Treatment: Each project is assessed individually, with treatment planned around the contamination, property conditions and agreed objectives.
Non-Masking Odour Removal: Our treatment is designed to break down residual odour-causing compounds rather than disguise them with fragrances.
Independent Verification: Where appropriate, environmental sampling and independent laboratory analysis can provide supporting evidence of treatment outcomes.
Reporting & Documentation: We provide treatment records and relevant reporting to support property management, insurance claims and restoration programmes.
Our approach is intended to complement the wider restoration process, helping property professionals make informed decisions about treatment, verification and handover.
👉 Explore our full range of Decontamination Services
BioSweep® BS900, ozone generation and chemical fogging use different treatment mechanisms. Their suitability depends on the contamination involved, environmental conditions, material compatibility and intended outcome.
The comparison below highlights general differences between these approaches. It should not be interpreted as a guarantee of effectiveness or suitability for every application.
Comparing BioSweep® BS900, Ozone & Chemical Fogging
Feature | BioSweep® BS900 | Ozone treatment | Chemical fogging |
Treatment method | Five-stage gas-phase oxidation | Ozone gas oxidation | Dispersal of chemical droplets |
Primary application | Residual odour removal and specialist decontamination | Oxidation of susceptible compounds | Product-specific disinfection or odour treatment |
Odour treatment | Designed to break down odour-causing compounds | Can react with certain odour compounds | Depends on the product and formulation |
Surface treatment | Exposed and accessible surfaces | Depends on exposure and conditions | Depends on droplet distribution and surface access |
Chemical residues | No applied liquid chemical coating | No applied liquid coating; reaction by-products may occur | Product-dependent residues may remain |
Occupancy during treatment | Area must be unoccupied | Area must be unoccupied for hazardous ozone applications | Depends on product instructions and application |
Source removal required | Yes, where contamination sources remain | Yes | Yes |
Verification | Environmental sampling where appropriate | Method-dependent | Method-dependent |
Treatment limitations | Preparation, accessibility and contamination type | Concentration, exposure and material compatibility | Formulation, coverage and material compatibility |
Frequently Asked Questions
Is BioSweep® BS900 more effective than ozone treatment?
BioSweep® BS900 and ozone treatment use different oxidation processes. Their effectiveness depends on the contamination involved, environmental conditions and treatment objectives. BioSweep® BS900 uses a five-stage gas-phase oxidation process designed for specialist odour removal and decontamination, following appropriate cleaning and source removal.
Does BioSweep® BS900 permanently remove odours?
BioSweep® BS900 is designed to break down residual odour-causing compounds rather than mask them with fragrances. Lasting results depend on identifying and addressing the original contamination source, completing appropriate cleaning and removing materials that cannot be adequately remediated. Where the source remains, odours may persist or return.
Can BioSweep® BS900 treat contamination inside walls or beneath flooring?
Gas-phase treatment can reach exposed air and accessible surfaces within the designated treatment environment. However, it should not be assumed to resolve contamination trapped within sealed cavities, beneath flooring or inside heavily affected materials. Additional investigation, cleaning or removal may be necessary.
Is BioSweep® BS900 safe for people, pets and furnishings?
BioSweep® BS900 is undertaken under controlled conditions by trained technicians. People, pets and plants must be excluded from the treatment area throughout the process. Re-entry is permitted only after the treatment and required completion procedures have been carried out. Sensitive materials and contents are assessed as part of treatment planning.
Does BioSweep® BS900 leave chemical residues?
BioSweep® BS900 is a residue-free gas-phase treatment process. Unlike chemical fogging, it does not rely on applying liquid treatment products or leaving a chemical coating on surfaces.
How does BioSweep UK verify treatment results?
Where appropriate, BioSweep UK can undertake pre- and post-treatment environmental sampling, including airborne mould, surface microbial, ATP or selected VOC testing.
Samples requiring laboratory analysis are submitted to independent laboratories, with UKAS accreditation applying to specific analytical methods where available.
Results are interpreted alongside site conditions, completed works and agreed treatment objectives. Testing provides supporting evidence rather than a universal guarantee that all contamination has been removed.
Need Specialist Odour Removal or Decontamination?
BioSweep UK provides specialist odour removal, mould remediation and environmental decontamination for residential, commercial and managed properties.
We work alongside insurers, loss adjusters, restoration contractors, landlords and property management companies, supporting projects following fire, water damage and other contamination incidents.
Based in Hampshire, we provide services across the South East and nationwide for insurance and commercial projects.
Our team can advise on the appropriate treatment approach, necessary preparatory works and options for independent environmental verification.
Contact BioSweep UK to discuss your requirements.
Telephone: 01243 697359
Email: info@biosweep.co.uk
Related Services
